Yealink SIP-21P E2 User Manual Download Page 22

Page: 22 / 156

User Guide for the SIP-T21(P) E2 IP Phone

2) Connect the handset and optional headset

3) Connect the network and power

You have two options for power and network connections. Your system administrator will

advise you which one to use.



AC power



Power over Ethernet (PoE)

Note

AC Power

To connect the AC power:

Connect the DC plug on the power adapter to the DC5V port on the phone and
connect the other end of the power adapter into an electrical power outlet.

Connect the included or a standard Ethernet cable between the Internet port on
the phone and the one on the wall or switch/hub device port.

Power over Ethernet

With the included or a regular Ethernet cable, the SIP-T21P E2 IP phone can be powered
from a PoE-compliant switch or hub.

To connect the PoE for the SIP-T21P E2 IP phone:

Connect the Ethernet cable between the Internet port on the phone and an

PoE is not applicable to the SIP-T21 E2 IP phone.

Summary of Contents for SIP-21P E2





























































































































































Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands

Yealink SIP-21P E2, User Manual

Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands