Yealink SIP-21P E2 User Manual Download Page 99

Page: 99 / 156

Basic Call Features

To disable call forward in phone mode:

Do one of the following:

Press when the phone is idle.

Press Menu->Features->Call Forward.

Press or to select the desired forwarding type and then press the Enter soft
key.

Press or , or the Switch soft key to

select Disabled to disable the call

forward.

Press the Save soft key to accept the change.

To disable call forward in custom mode for a specific account:

Press Menu->Features->Call Forward or press when the phone is idle.

Press or to select the desired account and then press the Enter soft key.

Press or to select the desired forwarding type and then press the Enter

soft key.

Press or , or the Switch soft key to

select Disabled to disable the call

forward.

Press the Save soft key to accept the change.

Dynamic Forwarding

To forward an incoming call to another party:

When the phone is ringing, press the FWD soft key.

Enter the number you want to forward the incoming call to.

Press , , or the Send soft key.

The LCD screen prompts a call forward message.

Note

When the phone forwards a call, the forward call prompt window will pop up by default,

if you want to disable the feature, contact your system administrator for more
information.

Summary of Contents for SIP-21P E2





























































































































































Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands

Yealink SIP-21P E2, User Manual

Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands