Yealink SIP-21P E2 User Manual Download Page 78

Page: 78 / 156

User Guide for the SIP-T21(P) E2 IP Phone

The default delay time is 4 seconds.

Click Confirm to accept the change.

Note

You can dial a hotline number immediately upon lifting the handset, pressing the
Speakerphone key or the line key. You can also configure a delay, where the phone will
dial out the hotline number automatically after the designated period of time.

To configure the hot line number via phone user interface:

Press Menu->Features->Hot Line.

Enter the desired number in the Hot Number field.

Enter the delay time in the Hotline Delay field.

The valid values range from 0 to 10(seconds) and the default value is 4.

Press the Save soft key to accept the change or the Back soft key to cancel.

Hotline is configurable via web user interface at the path Features->General
Information.

Live dialpad is configurable via web user interface only.

Summary of Contents for SIP-21P E2





























































































































































Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands

Yealink SIP-21P E2, User Manual

Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands