Yealink SIP-21P E2 User Manual Download Page 56

Page: 56 / 156

User Guide for the SIP-T21(P) E2 IP Phone

Press the Option soft key, and then select Detail.

The detailed information of the entry appears on the LCD screen.

To place a call from the call history list:

Press the History soft key.

Press or to switch between All Calls, Placed Calls, Received Calls, Missed
Calls and Forwarded Calls.

Press or to select the desired entry.

Press the Send soft key.

To add a contact to the local directory (or blacklist directory) from the call history list:

Press the History soft key.

Press or to switch between All Calls, Placed Calls, Received Calls, Missed
Calls and Forwarded Calls.

Press or to select the desired entry.

Press the Option soft key, and then select Add to Contacts (or Add to Blacklist).

Enter the desired values in the corresponding fields.

Press the Save soft key.

For more information, refer to

Contact Management

on page

To delete an entry from the call history list:

Press the History soft key.

Press or to switch between All Calls, Placed Calls, Received Calls, Missed
Calls and Forwarded Calls.

Press or to select the desired entry.

Press the Delete soft key.

To delete all entries from the call history list:

Press the History soft key.

Press or to switch between All Calls, Placed Calls, Received Calls, Missed
Calls and Forwarded Calls.

Press the Option soft key, and then select Delete All.

Press the OK soft key.

Summary of Contents for SIP-21P E2





























































































































































Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands

Yealink SIP-21P E2, User Manual

Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands