1. Remove the alternator cover as described in
Chapter Five.
2. Remove the clutch adjuster locknut (A,
Figure
38
) and washer (B).
3. Disconnect the return spring (A,
Figure 39
)
from the post on the alternator cover, and remove
the clutch lever (B).
4. Turn the alternator cover over and remove the
push screw assembly (
Figure 40
) from the housing
in the cover.
5. Remove the ball assembly (A,
Figure 41
) from
the push screw (B).
6. Inspect the clutch lever (A,
Figure 42
) for signs
of wear or damage.
7. Inspect the balls in the ball assembly (B,
Figure
42
) for scratches, heat discoloration or other signs
of damage.
8. Inspect the detents (C,
Figure 42
) in the push
screw for scratches, wear or heat discoloration.
9. Inspect the clutch release mechanism oil seal
(
Figure 43
) for damage or brittleness.
10. Replace any part that is worn or damaged.
178
CHAPTER SIX
37
CLUTCH RELEASE MECHANISM
1. Pushrod No. 2
2. O-ring
3. Adjuster
4. Push screw
5. Ball assembly
6. Housing
7. Oil seal
8. Pin
9. Clutch lever
10. Washer
11. Nut
12. Spring
38
39
