10
Paper and other Media
Xerox Phaser 3635MFP User Guide
159
Envelope Mode
1.
Lower the bypass tray, located on the front of the product and unfold the
paper support extension.
Remove any curl
on envelopes before
loading them into the
Bypass Tray.
2.
Prepare a stack of envelopes for loading by flexing or fanning them back
and forth. Straighten the edges on a level surface.
3.
Load the print material with the
print side facing down and
against the right edge of the
tray.
4.
Adjust the paper guide to the
width of the stack of print
material. Ensure you have not
loaded too much print media.
The stack should be under the
Max. Fill Line.
The UI screen shows the current paper supply settings for the Bypass Tray on
the left hand side. Press the
Size
button and/or the
Type
or
Color
button to
change the settings if necessary. If the settings are correct, press the
Confirm
button. Please refer to
Setting the Paper Size in the Paper and other Media
chapter on page 162
.
Bypass Tray
Paper Guide
Max Fill Line
Summary of Contents for Phaser 3635MFP/S
