wtw PROTOC 200, Operating Manual

Page: 15 / 60

PROTOC 200 Installation
3 - 15
3.4 Installation
3.4.1 Wall assembly
Attention
Do not shorten the tubes included; their full length is required for fas-
tening the swage locks.
Figure 3-1 PROTOC 200 dimensions (given in mm)
Mounting the analyzer
and controller
Dimensions and space
requirements
1 Attach the analyzer securely to the mounting wall using the 4
wall fixtures. Bear in mind that the unit must be accessible from
all sides.
2 Attach the controller fixture to the mounting wall; if possible, it
should be mounted close to the analyzer.
3 Place the controller onto the wall fixture.
4 Space requirements for the controller are shown in the dimen-
sioned views in Figure 3-1. Figure 3-2 presents a typical wall
assembly with the required drilled holes.