wtw PROTOC 200, Operating Manual

Page: 45 / 60

PROTOC 200 Setup
5 - 45
5.5 Controller setup
5.5.1 Overview
The following settings can be adjusted in this menu:
l
Date/time
l
Configuration of the analog output
(current or voltage output)
l
Fine adjustment of the analog output
(current or voltage limits)
l
Configuration of the serial interface (option)
9 Press F3. The time base for the graphic display is highlighted
(TIME BASE).
10 Set as required with the UP/DOWN keys (8HR or 24HR).
11 Press F4. The setting for the signal averaging is highlighted
(SIGNAL AVERAGING OFF, 15, 30 or 60 SEC).
12 Return to measurement: Press the ENTER/MENU key until the
measurement display appears.
MAIN MENU
(Hauptmenü)
CONTROLLER SETUP
(Controller-Einstellungen)
F 4
TIME/DATE
(Uhrzeit/Datum)
SELECT D TO A
(Analogausgang
Strom/Spannung)
F 1 F 2
Communications
(Einstellungen
Schnittstelle)
CURRENT/VOLTAGE
(Feineinstellung
Ausgangsbereiche)
F 3 F 4