wtw PROTOC 200, Operating Manual

Page: 34 / 60

Setup PROTOC 200
5 - 34
5.2 Sensor setup menu
5.2.1 Overview
Proceed as follows to change the settings:
5.2.2 Selecting the units
1 Press the ENTER/MENU key. The MAIN MENU appears on
the display.
2 Press F1. The SENSOR SETUP menu appears.
3 Press F1. The units available for selection (SCALE) appear.
4 Alternate between ppm and ppb with the UP or DOWN key.
5 Confirm and return to measurement: Press the ENTER/MENU
key repeatedly until the measurement display appears.
ZERO
(Nullabgleich)
F 2
F 2
PPM PPB
F 1
CLEAN
(Reinigung)
F 1
ZERO
(Nullabgleich)
CAL.
(Kalibrierung)
F 1
SCALE
(Einheit)
MAIN MENU
(Hauptmenü)
F 1
SENSOR SETUP
(Sensoreinstellungen)
NORMAL CAL
(Nullpunkt/Kalibrierung)
F 3
RANGE SELECT
(Meßbereichswahl)
CAL.
(Kalibrieren)
F 3
CONFIGURE AUTO MODE
(Intervalle/Zeiten)
F 1
F 4
PURGE
(Spülen)
F 2
F 4
EXTENDED SETUP
(erweitertes Setup)
Units / SCALE