manualshive.com logo in svg

Wheatstone Corporation AirAura X1, Technical Manual, Page: 7 / 143

Share
Download
Wheatstone Corporation AirAura X1 Technical Manual Download Page 7

page  Contents – 4

AirAura X3 / May 2013

C O N T E N T S

      Miscellaneous ......................................................................................................3-14
         Phase Rotator ...................................................................................................3-14
         Input Settings Follow Preset Takes ..................................................................3-15
   Equalizer Menu .......................................................................................................3-15
      EQ Enable ............................................................................................................3-16
   iAGC and Compressor ...........................................................................................3-17
      iAGC ....................................................................................................................3-18
         Window Size .....................................................................................................3-18
         Attack Speed ....................................................................................................3-18
         Release Speed .................................................................................................3-18
         Adapt Mode ......................................................................................................3-18
         iAGC Gate Threshold .......................................................................................3-19
         Return To Zero (RTZ) ........................................................................................3-19
      Master .................................................................................................................3-19
         Multiband Master Drive ....................................................................................3-19
         Multiband Coupling Reference .........................................................................3-20
         Main AGC Gate Mode ......................................................................................3-20
         Bypass Options ................................................................................................3-20
      Band Tabs (1-5) ...................................................................................................3-21
         Density (Basic Control) .....................................................................................3-21
         Band Mix (Basic Control) ..................................................................................3-21
         Master Attack (Basic Control)...........................................................................3-22
         Master Release (Basic Control) ........................................................................3-22
         Band Threshold (Expert Control) ......................................................................3-22
         Ratio (Expert Control) .......................................................................................3-22
         Band Coupling (Expert Control) .......................................................................3-23
         Compressor Attack (Expert Control) ................................................................3-23
         Compressor Release (Expert Control) ..............................................................3-23
         Crossover Control (Expert Control) ..................................................................3-24
      Effect Tab .............................................................................................................3-24
   HD Limiter ..............................................................................................................3-26
      Multiband Drive (Basic Control) ...........................................................................3-26
      Limiter Drive (Basic Control) ................................................................................3-27
      Multiband Knee (Basic Control) ...........................................................................3-27
      L/R Linked (Basic Control) ...................................................................................3-27
      Bass Style (Basic Control) ...................................................................................3-28
      Master Attack (Expert Control) ............................................................................3-28
      Master Limiter Release (Expert Control) ..............................................................3-28
      Wideband Delayed Release (Expert Control) ......................................................3-28
      Master Threshold (Expert Control) ......................................................................3-28
      Wideband Threshold (Expert Control) .................................................................3-29
      Filter Frequency (Expert Control) .........................................................................3-29
      Filter Style (Expert Control)..................................................................................3-29
      Bass Clip Threshold (Expert Control) ..................................................................3-29
      Bass Texture (Expert Control) ..............................................................................3-30
   FM Limiter ..............................................................................................................3-30
      Multiband Drive (Basic Control) ...........................................................................3-30
      Clipper Drive (Basic Control) ...............................................................................3-31
      Bass Enhance (Basic Control) .............................................................................3-31
      Multiband Knee (Basic Control) ...........................................................................3-31
      Pre-Emphasis (Basic Control) .............................................................................3-32
         Where Should Pre-Emphasis Go? ....................................................................3-32

Summary of Contents for AirAura X1
















































































































































Reviews:

No comments