page 3 – 51
AirAura X1 / Dec 2016
A i r A u r a X 1 P R O G U I
To switch the headphone source, left click on the knob and use the mouse wheel to
switch between one of the seven options. Left click the mouse to select the new source.
The source WILL NOT CHANGE until you confirm it my left clicking the mouse.
Control Timeout
When any of the “and/or” options are changed in X1, the user needs
to press the left mouse key or the jog wheel on the front panel in order to
confirm the change. The control timeout sets the amount of time allowed to
confirm the change before the control being adjusted times out and returns
to the previous setting.
The control range is OFF (never goes back to the previous state) to
60 seconds. The shortest time allowed is 1 second. The default is 10 seconds.
To change this control, left click to lengthen or shorten the time of the
timeout.
Presets
On the right of the System screen is a vertically disposed row of buttons
to manage, save, backup, and copy presets. The three buttons are:
List – Shows the list of presets on the hardware. Double clicking on any
of the presets will take that preset.
Save – Opens the save dialogue box that allows you to name a new preset
and pick the preset slot you would like to save the preset to.
Library – Opens the preset manager. The preset manager allows you
to copy presets from the hardware to the local PC and vice versa. It also
allows you to extract presets from the hardware to share with other users.
List
When left-clicked, a dialog box appears, showing all
presets stored on the hardware.
Double-clicking on a preset brings it immediately into
use in the X1. The box stays open until deliberately closed,
allowing differing presets to be double-clicked upon readily
in succession. This is a very direct means of comparing
presets.
NOTE:
It is important to remember to save the current
present settings before invoking others, or they will be lost.
Note also that you can only Take presets that are already
loaded in the X1 from this dialog box.