manualshive.com logo in svg

Wheatstone Corporation AirAura X1, Technical Manual, Page: 31 / 143

Share
Download
Wheatstone Corporation AirAura X1 Technical Manual Download Page 31

page  2 – 1

AirAura X1 / Dec 2016

F R O N T   P A N E L   G U I

Front Panel GUI

Input Screen ...................................................................................2-3

Input Source ...............................................................................................................2-3

Digital Gain .................................................................................................................2-4

Analog Gain ................................................................................................................2-4

L/R Balance ................................................................................................................2-4

Phase Rotator .............................................................................................................2-4

High Pass Filter ..........................................................................................................2-4

Automatic Failover ......................................................................................................2-5

Insert Loop Option .....................................................................................................2-5

5 Band iACC ...................................................................................2-6

AGC Drive ...................................................................................................................2-6

LF Density ..................................................................................................................2-6

HF Density ..................................................................................................................2-6

Attack Master .............................................................................................................2-7

Release Master ...........................................................................................................2-7

Gate Offset .................................................................................................................2-7

10-Band FM Limiter .......................................................................2-8

MB Limiter Drive .........................................................................................................2-8

Threshold Master .......................................................................................................2-8

Attack Master .............................................................................................................2-9

Release Master ...........................................................................................................2-9

Clip Drive ....................................................................................................................2-9

Pre-Emphasis .............................................................................................................2-9

   Where and When to Use Pre-Emphasis and De-Emphasis ...................................2-10

10-Band HD Limiter ...................................................................... 2-11

MB Limiter Drive ........................................................................................................2-11

Threshold Master ......................................................................................................2-11

Attack Master ............................................................................................................2-12

Release Master ..........................................................................................................2-12

HD Final Limiter ............................................................................2-13

Limiter Drive ..............................................................................................................2-13

Limiter Threshold .......................................................................................................2-13

Attack ........................................................................................................................2-14

Release ......................................................................................................................2-14

Delayed Release ........................................................................................................2-14

 Chapter Contents

Summary of Contents for AirAura X1
















































































































































Reviews:

No comments