manualshive.com logo in svg

Wheatstone Corporation AirAura X1, Technical Manual, Page: 104 / 143

Share
Download
Wheatstone Corporation AirAura X1 Technical Manual Download Page 104

page  3 – 46

AirAura X1 / Dec 2016

A i r A u r a   X 1   P R O   G U I

SYSTEM

The System screen allows system-wide settings to be configured, such as how the GUI 

communicates with the hardware and security settings within the processor.

Front Panel Security Settings

Setting and clearing passwords for the front panel touchscreen is possible 

from the security section of the GUI. You can choose to separately lock the 

Processing-related functions and those associated with Output functions 

such as stereo generator settings and output levels. Each may have its own 

passcode or they may share the same passcode at the user’s discretion. The 

reason for this functionality is to give stations who must cooperate with a 

designated transmission authority the ability to adjust their processing in 

any way they choose without giving the transmission authority access to 

the processing functions. Likewise it allows the transmission authority to 

manage “regulatory” things such as modulation levels, and without giving 

the transmission authority access to the processing controls.

There is no default password in the X1. If you are setting this up for the 

first time, you can skip the PASSWORD part and just enter the NEW PASSWORD and 

VERIFY the new password.  

Other options in this menu include the ability for the PC to remember the password for 

the processor, to hide the password as you type it (with dots instead of the actual characters) 

and the ability to gang the password for both the processing and output  options. When 

access is restricted, only the SYSTEM tab will be allowed to be viewed. If you try and 

access another tab, you will be prompted to 

input the proper password that covers the 

functions in that tab.

Pressing PROCESSING PASSWORD 

will bring up the screen to enter the new 

processing control password.

If the X1 does not have a password, you 

will be prompted to enter the password you 

would like to use to lock down the process-

ing functions. Once entered, you will be 

asked to verify the password selection. If 

the passwords match, the X1 will indicate 

the password has changed.

Repeat these steps to set or change the password for the output settings of the X1.

Summary of Contents for AirAura X1
















































































































































Reviews:

No comments