manualshive.com logo in svg

Wheatstone Corporation AirAura X1, Technical Manual, Page: 59 / 143

Share
Download
Wheatstone Corporation AirAura X1 Technical Manual Download Page 59

page  3 – 1

AirAura X1 / Dec 2016

A i r A u r a   X 1   P R O   G U I

 Chapter Contents

X1 Pro GUI

Getting Started ...............................................................................3-5
Connecting With The Pro GUI ......................................................3-5

Connecting Directly Without a LAN ............................................................................3-6

The X1 and Internet Security Concerns .....................................................................3-7

About DHCP and The X1 ............................................................................................3-7

AirAura Network Protocols and Ports Used ...............................................................3-7

Using The X1 Pro GUI ...................................................................3-8

Metering .....................................................................................................................3-8

   Input Meters ............................................................................................................3-8

   Multiband AGC and Enhance Meters ......................................................................3-9

   10-Band Limiter Metering .......................................................................................3-9

   Final Limiting Meters ...............................................................................................3-9

   Output Metering .....................................................................................................3-10

GUI Adjustment Controls ..........................................................................................3-10

   Input Setup Menu ...................................................................................................3-10

      Source Selection and Automatic Failover ...........................................................3-11

      Input Gain, Balance, and Input Loop ..................................................................3-11

         Analog Input Gain .............................................................................................3-11

         Digital Input Gain ..............................................................................................3-11

         L/R Balance ......................................................................................................3-12

         Enable Insert Loop ...........................................................................................3-12

      Codec Masking ...................................................................................................3-13

      High Pass Filter ...................................................................................................3-14

      Miscellaneous ......................................................................................................3-14

         Phase Rotator ...................................................................................................3-14

         Input Settings Follow Preset Takes ..................................................................3-15

   Equalizer Menu .......................................................................................................3-15

      EQ Enable ............................................................................................................3-16

   iAGC and Compressor ...........................................................................................3-17

      iAGC ....................................................................................................................3-18

         Window Size .....................................................................................................3-18

         Attack Speed ....................................................................................................3-18

         Release Speed .................................................................................................3-18

         Adapt Mode ......................................................................................................3-18

         iAGC Gate Threshold .......................................................................................3-19

         Return To Zero (RTZ) ........................................................................................3-19

Summary of Contents for AirAura X1
















































































































































Reviews:

No comments