VooDoo DCR 6000, Planning & Installation Manual

Page: 82 / 149

4. Connections DCR 6024/6128/6000
4 – 5
Planning and Installation –Rev. 1 / 7. 2001
4.5 TERMINAL PANEL – TAPEDECK DMS 6000
PE
PB - DATA
IN OUT
REM 3
REM 1
OFF
Audio
TE
Video
(PE)
OFF
SIGNAL
RS 232C REM 2
OUT IN
REC - DATA CONTROL
iMCS
TO PROCESSOR
AC IN
50 50
WAVE FORM MONITOR
TIME CODE
TERM
ON
OFF
TRIGGER
REMOTE
FUSE 2x T6.25A
(Rear Panel)
SMPTE TC EBU TECH3097–E
IN
AC POWER 100V to 240V with
grounding connection
Internal machine control system
Digital serial interface for remote
control panel/DCH 6024 auto editing
Grounding connection
TE Audio – Technical Grounding Audio
TE Video – Technical Grounding Video
PE Protective Grounding
SIGNAL
external osciloscope
displaying different RF– and
controltrack–signals
Bandwith > 50 MHz
TRIGGER
synchronize output for external
osciloscope
(PE) – Grounding Jack (for Service)
PLAYBACK – DATA
2 Bit parallel 8 channels ECL-level
RECORD – DATA
2 Bit parallel 8 channels ECL-level
CONTROL
Control signals for
between Tapedeck and Processor
(Timing, Reference signals)
TO PROCESSOR
Output to Processor
Input from Processor
iMCS
GROUNDING
MAINS IN
WAVE FORM MONITOR
TIME CODE
for external TC generator
OUT
from internal TC generator
IEEE 802.3
direct communication
REM 1
REMOTE
serial RS 422 ES-bus interface to
EBU TECH 3245-E
REM 2 IN/OUT
serial RS-422A interface inconformity
for editing systems (e.g. BBE)
REM 3
parallel interface SMPTE recom.
for extern control panel or
General Purpose Interface GPI
RS 232C
serial interface
for Philips service
with EIA standard
Fig. 405: Terminal panel of the Tapedeck DMS 6000