VooDoo DCR 6000, Planning & Installation Manual

Page: 72 / 149

3. Installation DCR 6024/6128/6000
3 – 19 Planning and Installation – Rev. 1 / 7. 2001
2. 50-pole connection cable
Connect the connection cable
4
at Tapedeck and Processor to the sockets
REC DATA.
For control between Tapedeck and Processor, connect the following two cables (in-
cluded in the delivery):
1. 50-pole connection cable
Connect the connection cable 5 5 at Tapedeck and Processor to the sockets
CONTROL.
2. Cheapernet cable KV 0770
Connect the Cheapernet cable
6
at Tapedeck and Processor to one of the
the two iMCS sockets.
The associated switch 7 at the iMCS socket of the Tapedeck has to be set
to OFF.
The switch 8 at the iMCS socket of the Processor has to be set to 50
OFF OFF
iMCS
50 50
Tapedeck
OFF
iMCS
Processor
Switch ”OFF”
Switch
Cheapernet cable
KV 0770
8
Fig. 315: Cheapernet connection
The individual external connections are described in the section 6 ’Connections’.
Connection facilities or connection proposals are contained in the section 4 ’Sys-
tem Configuration’.
Control
connection
External connection