VooDoo DCR 6000, Planning & Installation Manual

Page: 92 / 149

4. Connetions DCR 6024/6128/6000
4 – 15 Planning and Installation – Rev. 1 / 7. 2001
4.5.6 WAVEFORM MONITORING
SIGNAL-WFM-TRIGGER
Fig. 414: Waveform monitoring, Trigger
The connector ”SIGNAL-WFM” can be used for output the signals of the control
track, time code track or the envelopes of the 8 RF - signals (oscilloscope band-
width > 50 MHz).
Connection (BNC) for synchronization of the oscilloscope.
The selection of the output signals is made in the diagnostic menu with window
”Waveform Monitor” (see Operating Instructions, section 4.13.3).
SIGNAL WFM
TRIGGER