VooDoo DCR 6000, Planning & Installation Manual

Page: 104 / 149

4. Connections DCR 6024/6128/6000
4 – 27
Planning and Installation – Rev. 1 / 7. 2001
4.7 TERMINAL PANEL OF THE PROCESSOR DDP 6128
(Rear Panel)
AC POWER 100V to 240V
with grounding connection
IMCS IEEE 802.3
Digital serial interface for remote
control
PLAYBACK – DATA
Input from Tape Deck
2 Bit parallel 8 channels ECL-level
RECORD – DATA
Output to Tape Deck
2 Bit parallel 8 channels ECL-level
CONTROL
Control signals for direct comminication
between Tapedeck and Processor
(Timing, Reference signals)
HIPPI IN / OUT
Optical Connector
DPX – Monitor
XGA Signal R, G, B, HD, VD
TO DECK
AC IN
TE Audio - Technical Grounding
TE Video - Technical Grounding Video
PE - Proective Grounding
(PE) - Grounding Jack (for Service)
1024 x 768
80 Hz
Option
GROUNDING CONNECTIONS
IMCS
AC IN
PE
TO TAPEDECK
OFF
50
OFF
50
IP
POWER
1
0
MONI
HIPPI
TE
OUT IN
NETWORK INTERFACE
For future use
CONTROL REC DATA PB DATA
Fig. 428: Terminal panel of the Processor DDP 6128