VooDoo DCR 6000, Planning & Installation Manual

Page: 4 / 149

Contents
DCR 6024/6128/6000
II Planning & Installation – Rev. 1 / 7. 2001
3. Installation 3 – 1
3.1 Unpacking and repacking 3 – 1
3.2 Mechanical dimensions 3 – 2
3.3 Ventilation 3 – 5
3.4 Mounting 3 – 8
3.4.1 Mounting Tapedeck on Processor 3 – 8
3.4.2 Mounting Tapedeck and Processor side by side 3 – 10
3.4.3 Mounting Versions of DCR 6000 3 – 11
3.4.4 Mounting into a 19-inch cabinet 3 – 13
3.4.4.1 Safety Hazards 3 – 13
3.4.4.2 DCR 6024 built in into a19 inch cabinet 3 – 14
3.4.5 Installing Control Panel as Remote Panel 3 – 15
3.4.6 Installing Control Panel as Local Panel 3 – 16
3.5 Standard connections DCR 6024 3 – 17
3.5.1 Connect the connection cables 3 – 18
3.6 Standard connections DCR 6128 3 – 20
3.6.1 Connect the connection cables 3 – 21
3.7 Standard connections DCR 6000 3 – 23
3.7.1 Connect the connection cables 3 – 24
4. Connections 4 – 1
4.1 Rear View DMS 6000 4 – 1
4.2 Rear View DTV 6024 4 – 2
4.3 Rear View DDP 6128 4 – 3
4.4 Rear View DMS 6000 4 – 4
4.5 Terminal Panel – Tapedeck DMS 6000 4 – 5
4.5.1 AC power terminal unit BD 5146 4 – 7
4.5.1.1 Grounding 4 – 7
4.5.1.2 Mains connection 4 – 10
4.5.2 Processor Interface 4 – 11
4.5.3 Timecode IN/OUT (DTV Mode) 4 – 12
4.5.4 iMCS 4 – 13
4.5.5 Remote Control REM 1, REM 2, REM 3, RS 232C 4 – 14
4.5.6 Waveform Monitoring 4 – 15
4.5.7 Connection Control Panel and headphone with
volume adjustment
4 – 16
4.6 Terminal Panel – Processor DTV 6024 4 – 17
4.6.1 AC power terminal 4 – 19
4.6.1.1 Grounding 4 – 19
4.6.1.2 Mains connection 4 – 20
4.6.2 Tapedeck Interface 4 – 21
4.6.3 Video Analog Monitor Out 4 – 22
4.6.4 Audio Digital In/Out 4 – 23
4.6.5 Audio Monitoring 4 – 24
4.6.6 Audio Sync (48 kHz) 4 – 25
4.6.7 SDTV / NTSC Sync Out 4 – 25
4.6.8 Playback Ref Sync 4 – 25
4.6.9 iMCS 4 – 26