VooDoo DCR 6000, Planning & Installation Manual

Page: 28 / 149

1. General DCR 6024/6128/6000
1 – 19 Planning and Installation – Rev. 1 / 7. 2001
is fed to the Reed-Solomon decoder for error detection and correction. The de-
coded output data are stored in the segment memory to get an audio data se-
quence. The error concealment and the level control are applied to this sequence.
(AES/EBU interface encoding is applied to the audio data, and the encoded data
are output through rear panel connectors as audio digital output signals)
Analog Audio Option, Audio Monitoring Option
Two channels are available on the audio monitor output through the output connec-
tors of the rear panel and the headphone jack in the Tapedeck.The monitor signals
can be selected from the input or reproduced audio signals, the aux input signal,
the cue record signal and the cue playback signal.
The SYSC board consists of System Control block and Sync Generator block. The
System Control block controls the system, communicates with the Tapedeck and
outputs superimpose data. The sync generator block consists of a diverse sync
signal generator, a system clock regenerator, a playback sync signal phase ad-
juster, a NTSC / PAL sync signal generator and a channel clock generator circuits.
The timing of every synchronizing signal is completely switchable to meet each HD
standard. System Control