VooDoo DCR 6000, Planning & Installation Manual

Page: 90 / 149

4. Connetions DCR 6024/6128/6000
4 – 13 Planning and Installation – Rev. 1 / 7. 2001
4.5.4 IMCS
OFF OFF
iMCS
50 50
Tapedeck
OFF
iMCS
Processor
Switcher ”OFF”
Switcher
Cheapernet cable
Fig. 412: iMCS standard position
IMCS loop input for the Integrated Machine Control System (BNC) for connecting
a D-6 slave recorder when using two DCR 6024 in conjunction with the two-ma-
chine editor or for controlling up to 4 DCR 6024 D-6 machines (in preparation).
Note:
This system is based on the Cheapernet System and uses 50 ohm KV 770
cables (also RG 58). Do not terminate with 75 ohm. Terminate only with the
internal 50 ohm terminators which can be switched into circuit with the corre-
sponding switches.
Switching
iMCS
terminations I
mportant!
Switch that toggle switches ”iMCS” in position ”50 ”, which is not connected
with a cheapernet cable.