VooDoo DCR 6000, Planning & Installation Manual

Page: 111 / 149

4. Connections DCR 6024/6128/6000
4 – 34 Planning and Installation – Rev. 1 / 7. 2001
4.7.6 IMCS
OFF OFF
iMCS
50 50
Tapedeck
iMCS
Processor
Switch ”OFF”
Cheapernet cable
KV 0770
OFF
50
OFF
50
Switch ”OFF”
Fig. 436: iMCS
IMCS loop input for the Integrated Machine Control System (BNC) for connecting
the system to remote controllers (Pandora, TransferEngine etc).
Note:
This system is based on the Cheapernet System and uses 50 ohms KV 770
cables (also RG 58). Do not terminate with 75 ohms. Terminate only with the
internal 50 ohms terminators which can be switched into circuit with the cor-
responding switches.
Switching
iMCS
terminations
Important!
Switch toggle switch ”iMCS” in position ”OFF”, if it is connected only to one
Tapedeck or other iMCS device.