VooDoo DCR 6000, Planning & Installation Manual

Page: 140 / 149

7. DTV Applications DCR 6024/6128/6000
7 – 3 Planning and Installation – Rev. 1 / 7. 2001
7.3 PARAMETER SHEET BBE 900
For each DCR 6024 connected to one of these editors the following parameter
have to be set for the according VTR-port (SETUP GROUP 2-4) at the initial
installation.
It is recommended to install these parameters at all ports to ensure correct
machine control on all ports if other configurations are used (e.g. RS-422 router).
BLOCK BYTE Name Value Remarks
1
1
2
DEV-TYPE
01 / 00H
E0H
DCR 6024 identification.
01H at 50 Hz
00H at 60 Hz
1
3
4
MIN PREROLL
TIME
00H
64H / 78H 64H at 50H
78H at 60H
1 5 EDIT DELAY 05H
1 6 EE DELAY 05H
1 7 OVERRUN 05H
1 8 TRAJECTORY CON. 1FH
2 1 TC READ DELAY 0FH
2 2 START DELAY 07H
2 3 AFTER SYNC DEL- FFH
2 4 AFTER SYNC DEL+ 00H
2 5 CONST 11 01H
2 6 CONST 12 64H
2 7 PREROLL SPEED FFH
3 1 A1 ANALOG undef
3 2 A1 DIGITAL A1
3 3 A2 ANALOG undef
3 4 A2 DIGITAL A2
3 5 A3 ANALOG undef
3 6 A3 DIGITAL A3
3 7 A4 ANALOG undef
3 8 A4 DIGITAL A4
4 1 SYNC/A4 SELECT SYNC
Remark: Settings of Block 3 and 4 are not necessary for BBE 600 and BBE 900.
Setup-Parameter for
Editing-Systems
BBE 600, BBE 900,
BBE 900K and
BBE 910