VooDoo DCR 6000, Planning & Installation Manual

Page: 106 / 149

4. Connections DCR 6024/6128/6000
4 – 29 Planning and Installation – Rev. 1 / 7. 2001
4.7.1 AC POWER TERMINAL
AC IN
PE
POWER
1
0
TE
Fig. 429: AC power terminal unit of the Processor
4.7.1.1 GROUNDING
The Processor is to be connected to ground according to VDE 0800/part 2 and/or
the applicable national regulations. The protective conductor must always be con-
nected before the unit is connected to the mains.
The Processor has separate protective (PE) and functional (TE) grounds. Their ter-
minals are located at the rear.
PE
TE
Fig. 430: Grounding connector of the Processor
The enclosure of the Processor is always connected to the protective ground (PE)
conductor.
The machine is supplied with the PE and TE grounding terminals bridged.
GROUNDING CONNECTIONS TE
PE