VooDoo DCR 6000, Planning & Installation Manual

Page: 61 / 149

3. Installation DCR 6024/6128/6000
3 – 8 Planning and Installation – Rev. 1 / 7. 2001
3.4 MOUNTING
There are different ways to install or mount the DCR 6024/6120/6000. In this sec-
tion, the following possibilities are described:
Mounting Tapedeck on Processor DCR 6024 / DCR 6128
Mounting version s of DCR 6000
Mounting into a 19 inch cabinet
For the future is planned to allow the Control Panel to be remoted from the Tape-
deck.
Installing the Control Panel as a remote panel (in preparation!)
Installing the Control Panel as a local panel (delivery state)
ATTENTION!
When installing the DCR 6024/6128/6000, care should be taken not to cover
the fresh air entries to ensure optimum air circulation! See section 3.3 ”Ven-
tilation”.
3.4.1 MOUNTING TAPEDECK ON PROCESSOR
DMS 6000 THOMSO
N
DCR 6024
ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ
DDP 6128
PHILIPS
Fig. 306: Mounting Tapedeck on Processor
The Control Panel is already mounted to the Tapedeck when delivered.
The cover of the Processor is provided with four holes for fastening the Tapedeck.
The right rear hole has a locking facility which automatically locks when inserting
and sliding the Tapedeck.