VooDoo DCR 6000, Planning & Installation Manual

Page: 103 / 149

4. Connections DCR 6024/6128/6000
4 – 26 Planning and Installation – Rev. 1 / 7. 2001
4.6.9 IMCS
OFF OFF
iMCS
50 50
Tapedeck
Processor
Switch ”OFF”
Switch
Cheapernet cable
OFF
IMCS
50
Fig. 427: iMCS
IMCS loop input for the Integrated Machine Control System (BNC)
for connecting a the slave recorder when using two DCR 6024 in conjunction with
the internal two-machine editor
or
for controlling up to four DCR 6024 machines
or
for connecting one or more control panels.
Note:
This system is based on the Cheapernet System and uses 50 ohms KV 770
cables (also RG 58). Do not terminate with 75 ohms. Terminate only with the
internal 50 ohms terminators which can be switched into circuit with the cor-
responding switches.
Switching
iMCS
terminations
Important!
Switch toggle switch ”iMCS” in position ”50
”, if it is connected only to one
Tapedeck.