VooDoo DCR 6000, Planning & Installation Manual

Page: 86 / 149

4. Connetions DCR 6024/6128/6000
4 – 9 Planning and Installation – Rev. 1 / 7. 2001
If necessary (for example in studios having separate protective and functional
grounds), the jumper between PE and TE may be removed. In this case, also the
central functional ground (video and audio ground) must be connected to the
TE terminal screw. It should be designed as functional ground with protective
ground properties and free of noise voltage in line with VDE 0800/part 2.
The cross section of the conductor should meet the requirements mentioned at the
beginning of this section. A low impedance interconnection of the two ground con-
ductors should be made at the central studio terminal or at the ground distributor.
Separated
Grounding