Vision MaxPro, Operation Manual

Page: 89 / 203

Operations 85
© 2006 Vision Engraving Systems
You can adjust the area that the text will be centered into by clicking on the Frame
Properties symbol. You can adjust the settings that are used for the frame by click on the
Frame Properties symbol shown below.
This will open the frame properties dialog box shown below.
The text frame margins may be set in terms of absolute distances from the plate edge or by
a percentage of the plate size. While you can click on Absolute for the Margins
measurements and enter the exact margins, it is recommended that the default Percentage
option be used. This uses a percentage of the plate size versus having to change the
values for each plate. Click on Close to go back to the text entry screen.
The sign blank area will be highlighted with dash lines and the cursor will appear.
On the Fonts Property Bar, make the following changes:
Font: RomainUI