Vision MaxPro, Operation Manual

Page: 8 / 203

Vision MaxPro 4
© 2006 Vision Engraving Systems
Ø 1 Medium cone
Ø 4 Small dowel pins
Ø 4 Small button head screws
Check to see that all of the items are included. Should any of the contents be missing,
damaged, or of the incorrect type, please call your sales representative or Vision
immediately.
If the Vision Platinum Jewelry package was purchased, the items below are included also in
addition to the items above.
Ø
1 Computer (Desktop or Laptop)
Ø 1 Scanner
Ø 1 Ring Gauge
Ø
1 Digital Calipers
Ø
1 Ring Attachment
Ø
1 Rotating diamond cutter .005 tip
Ø
1 Rotating diamond cutter .015 tip
Ø
2 Burnishing Adaptors
Ø
1 Universal Pin Fixture
Ø 1 Adjustable Pen Fixture
Ø 1 Universal Clamping Bars w/Medallion Holder
Ø
1 T-Handle Allen Wrench 3/32"
Ø
1 Gold Rub n Buff
Ø
1 White Rub n Buff
Ø
1 Silver Rub n Buff
Step 2:
Prepare a clean, level surface to put the engraving machine on. Carefully lift the machine
out of the crate and place it on the table.
Step 3:
After unpacking the machine, make sure that you SAVE THE CRATE, FOAM PACK and
ANY OTHER BOXES. They can be reused in the event the system must be transported to
another location or returned for service. Improper packaging for shipment can damage the
machine and may void the warranty.
Specifications
Z-Axis stroke/clearance:
3 inches (75 mm)