Vision MaxPro, Operation Manual

Page: 109 / 203

Operations 105
© 2006 Vision Engraving Systems
Hint:
The upper left and lower right corner locations can be marked with an erasable marker
such as a China Marker, making it easier to locate with the laser pointer.
Note:
The “measure” procedure can be repeated if the area defined is not satisfactory by
starting from the beginning again.
Hardware LED display
After following the steps explained in the software the pendant LCD will display the
message” Outline material”, “Enter” =Yes, “Exit” =No. Press “Enter” and the laser pointer will
outline the area defined for verification. The screen returns the same message until “Exit” is
pressed.
Engraving the job
After the job has been designed click on the “Engrave” icon (alternatively click on the
“Engrave” menu and choose “Output”)