Vision MaxPro, Operation Manual

Page: 68 / 203

Vision MaxPro 64
© 2006 Vision Engraving Systems
EXIT
Button - The Exit button is used to exit out of a menu item on the LCD screen. Press
Exit and the machine will back up one menu item for every time the exit button is pressed.
JOG Button - Use the XY jog buttons to move the table in the direction of the arrow you
press.
HINT: Pressing the Shift button and then the Speed Adjust button will change the jog speed
shown on the LCD screen from Medium to slow to Fast. The speed that the X and Y jog at
is determined by this. Press the Shift and Speed Adjust buttons until the LCD shows
Jog=Slow to fine tune the jog position.
JOG MODE
Button - This button is used to change the functionality of the Up and Down jog
buttons. When the jog mode button is pressed, the light on the button will illuminate. The
Up and Down jog buttons now move the spindle up and down. Pressing the jog mode
button a second time turns this mode off and shuts the light off on the button.
GOTO HOME Button - When the Vision MaxPro machine is initially turned on, the Goto
Home button is used to power up the table and move the spindle to the home position.