Vision MaxPro, Operation Manual

Page: 198 / 203

Vision MaxPro 194
© 2006 Vision Engraving Systems
dots to the right. Select the C:\Vision Machine Tools\Outbox\ folder per the picture below.
Click the X in the upper right corner of the DNC screen to close it.
16.Right mouse on the Job Server icon in the Windows system tray at the lower right corner
of the screen and select
HotWatch
.
17.In the HotWatch Window, change the “Inbox” by clicking the three dots to the right.
Select the C:\Vision Machine Tools\Inbox\ folder per the picture below. Change the
“Outbox” by clicking the three dots to the right. Select the C:\Vision Machine Tools
\Outbox\ folder. Change the “Refresh Interval” to 4 seconds and put a check mark next to
“Activate HotWatch on startup of JobServer”. Click the X in the upper right corner of the
HotWatch screen to close it.