Vision MaxPro, Operation Manual

Page: 130 / 203

Vision MaxPro 126
© 2006 Vision Engraving Systems
The number entered in the “Font size” (% of ring width) field is the height of the text that will
be engraved on the ring. The number entered is used in relation with the width of the ring.
For example if the ring width entered in the first screen was 0.250” and “50” was entered in
this field then the text height will be 0.125”
The number entered in the “Edge margins” (% of ring width) field are the margins set as a
“none engrave area” from the top and bottom edges of the ring and works in relation to the
width of the ring. For example if the ring width entered in the first screen was 0.250” and “10”
was entered in this field then the margins will be .025”. Take note that the total of the
margins and the Font size can not exceed the ring width.