Virgin Lobster 700TV, User Manual

Page: 87 / 170

Getting Connected 87
Accessories > Wireless Modem .
13. Select Bluetooth as the Connection type.
14. To use your Lobster 700TV as a GPRS modem, set the Access
point name (APN)
. To set, click
Menu > APN Setting
and enter
the access point name.
15. On your computer, disable ActiveSync.
Note To disable ActiveSync on your computer, click File > Connection
Settings and then clear Allow connections to one of the following .
16. Click Menu > Start on your Lobster 700TV.
After successfully connecting your Lobster 700TV to the computer
via Bluetooth, the next thing to do is to add your Lobster 700TV as a
Bluetooth modem to your computer.
To add the Lobster 700TV as a Bluetooth modem
1. On the computer, click Start > Control Panel > Phone and
Modem Options .
2. Click the Modems tab. Check if there is a Bluetooth modem,
“Generic Bluetooth Modem” or “Standard Modem over Bluetooth
Link,” listed. If there is, skip to step 6.
3. If there is no Bluetooth modem listed on the Modems tab, click Add .
4. In the Add Hardware Wizard, click Next .
5.
On the Select Bluetooth Device screen, select the phone name
and then click OK .
6. On the Modems tab, select the Bluetooth modem listed and then
click Properties .
7. Click the Advanced tab, then in the Extra initialization
commands text box, enter:
AT+CGDCONT=1,”IP”,”APN”
where APN is the access point name provided by your mobile
network operator to give you access to the Internet. Then click OK .
8. Click OK to exit the Phone and Modem Options .
Your Lobster 700TV is now set up as a Bluetooth modem. For details
about how to connect to the Internet, see “Dial-up and connect to the
Internet” in this chapter.