Varian 450-GC, User Manual

Page: 55 / 205

Peripheral Connectors
Page: 36 User Manual 450-GC Varian, Inc.
J401 ANALOG OUT
Analog signals for Integrators
Figure 5: Connector J401
If an Integrator or other device is connected, the 450-GC is waiting (not ready on
display) for Ready-In signal (pin-1) to start.
In the Setup tab Configuration, on page 67 the Ready-In Closed Contact checkbox must
be checked! Available Analog cables on page 94.
0 – 1 Volt default range used for all detectors except the FID (0 – 10 Volt).
*
Top View
1
2
1
2
2
2
3
3
3
3
3