Varian 450-GC, User Manual

Page: 32 / 205

Installation Installation
Varian, Varian, Inc. Inc. User User Manual Manual 450-GC 450-GC Page: Page: 13 13
COLUMN INSTALLATION AND COLUMN INSTALLATION AND CONDITIONING CONDITIONING
Your GC arrives ready for Your GC arrives ready for installation of an analytical column. On first installation of an analytical column. On first
installation, a new column needs to be conditioned. installation, a new column needs to be conditioned.
Conditioning is Conditioning is performed with the de performed with the detector end of the column not tector end of the column not
connected. connected.
You may need to install and condition a new column after your GC has been in You may need to install and condition a new column after your GC has been in
use for some time. Reset
use for some time. Reset all Injector, detector and column ovens to all Injector, detector and column ovens to
≤≤
50 50
°°
C to C to
avoid burn hazards when connecting column to avoid burn hazards when connecting column to Injector and detector parts Injector and detector parts
inside the oven. See inside the oven. See also also
Column Conditioning Column Conditioning on page 23 on page 23 ..
Prior to installing your column, check that Prior to installing your column, check that the factory-installed Injector is the factory-installed Injector is
equippe equipped with d with the proper insert for the proper insert for your application. Factory-installed Injectors, your application. Factory-installed Injectors,
other than the 1041, have a glass other than the 1041, have a glass insert suitable for a variety insert suitable for a variety of applications. If of applications. If
your application calls for a different insert, your application calls for a different insert, replace the factory-installed insert replace the factory-installed insert
prior to installing your column. Refer to prior to installing your column. Refer to the Injector section of the Manual for the Injector section of the Manual for
instructions to replace the insert instructions to replace the insert on page 97 on page 97 ..
The factory-installed inserts for the Injectors are shown below, more Injector The factory-installed inserts for the Injectors are shown below, more Injector
insert
insert you can find here you can find here ,, on page 443 on page 443 ..
Injector Injector Insert Insert Information Information Pa Part rt Numbe Numberr
1061 1061 Flash Flash Injector Injector Liner, Liner, 0.53 0.53 mm mm ID ID Capillary Capillary columns columns 03-92611943 03-92611943
1079 1079
PTV PTV
3.4 3.4 mm mm unpacked unpacked Injector Injector insert insert 03-92611945 03-92611945
1093 1093 0.8mm 0.8mm ID, ID, 0.5mm 0.5mm restriction restriction SPI SPI deactivated deactivated Injector Injector Liner Liner SG09203 SG092034 4
1041 1041 Insert Insert for for 0.53 0.53 mm mm ID ID columns columns 03-92543101 03-92543101
1177 1177 Glass Glass Injector Injector, , 4 4 mm mm ID, ID, unpacked, unpacked, single single gooseneck gooseneck 03-92611927 03-92611927
Table 3: Factory-Installed Injector Inserts Table 3: Factory-Installed Injector Inserts