Varian 450-GC, User Manual

Page: 199 / 205

Appendix A: Error Codes
Varian, Inc. User Manual 450-GC Page: 481
56 IOC Bad Cmd Event - - -
57 IOC Stepper in Motion Event - - -
58 IOC Bad Parameter Event - - -
59 IOC Run mode error Event - - -
60 IOC no Detector Event - - -
61 IOC Command not Allowed Event - - -
62 IOC_EFC_BUFFER_OVERFLOW, Unit rebooted Event
Caused by too many request
requested by IOC to EFC Interface
print.
GC reboot the interface
print firmware
-
63
IOC_EFC_COMMUNICATION_ERROR, Unit
Rebooted
Event
Communication between EFC
Interface Print and EFC broken.
GC reboot the interface
print firmware
-
Zone Open Sensor (zone)
67 Column Oven Open Sensor Error
Column Oven sensor not in use, mis
used
Electronics off (all)
H2 flow set to 0.0
mL/min
Check Column Oven zone
68 Zone 1 Open Sensor Error Zone 1 sensor not in use, mis used
Electronics off (all)
H2 flow set to 0.0
mL/min
Check zone (1)
69 Zone 2 Open Sensor Error Zone 2 sensor not in use, mis used
Electronics off (all)
H2 flow set to 0.0
mL/min
Check zone (2)
70 Zone 3 Open Sensor Error Zone 3 sensor not in use, mis used
Electronics off (all)
H2 flow set to 0.0
mL/min
Check zone (3)
71 Zone 4 Open Sensor Error Zone 4 sensor not in use, mis used
Electronics off (all)
H2 flow set to 0.0
mL/min
Check zone (4)
72 Zone 5 Open Sensor Error Zone 5 sensor not in use, mis used
Electronics off (all)
H2 flow set to 0.0
mL/min
Check zone (5)
73 Zone 6 Open Sensor Error Zone 6 sensor not in use, mis used
Electronics off (all)
H2 flow set to 0.0
mL/min
Check zone (6)
Shorted Sensor (zone)
74 Column Oven Shorted Sensor Error Shorted sensor. Defect Sensor
Electronics off (all)
H2 flow set to 0.0
mL/min
Check Column Oven zone
75 Zone 1 Shorted Sensor Error Shorted sensor. Defect Sensor
Electronics off (all)
H2 flow set to 0.0
mL/min
Check zone (1)