Varian 450-GC, User Manual

Page: 130 / 205

Detectors
Page: 280 User Manual 450-GC Varian, Inc.
ANALOG OUTPUT
The 450-GC can be equipped with an option board.
The analog output signals are located at connector J401, on page 36 on the top
of the GC, accessed by removing the top left cover.
This connector contains all 3 analog channels plus status signals for “Ready-In”
to the GC and “Start Out” from the GC.
In the SETUP page by the detector tab on the second page (Page 2 or
page 3) the Detector Analog Output screen will be visible, only if the Analog
option board is present.
The Analog Output Port name can be changed by the button “Edit”.
If the Range setting must be changed, make sure that the Range setting
matches the mainboard jumper settings !