Valco Cincinnati VC3500, User Manual

Page: 73 / 241

Appendix A VC3500 User’s Manual
Valco Cincinnati 78
8. At the main screen, touch one of the four-digit numbers on the bottom half of the screen. The glue-pattern
edit screen displays (Figure 28).
9. Using the plus and minus keys, set the second delay (left parameter) to 00.50.
10. Using the plus and minus keys, set the second pattern (right parameter) to 00.50. (the second inch of the
total 20 inches has now been programmed).
11. Press the symbol in the middle of the screen to return to the main screen.
12. Press the “CONFIG” button.
13. Press the “MORE” button in the level-1 menu screen. (The level-2 menu screen displays.)
14. Press the “REPEAT” button. (The repeat-function screen displays.)
15. Press channel 1. (The repeat setup screen for channel 1 displays.)
16. To program 18 additional inches of delay-pattern, press “1”, and then press “8”.
17. Press the “ENTER” button. The “OK DONE” message displays in the edit box and 18x displays in the
repeat factor box (lower left corner).
18. Press the exit key to return to the level-2 menu.
19. Repeat steps 1-18 for channel 2.
20. Run the machine and check the pattern.
21. Adjust the first delay and pattern to move the last repeated glue pattern where desired.