Valco Cincinnati VC3500, User Manual

Page: 118 / 241

Valco Cincinnati 29
Menus
Introduction
This section describes the control’s menus. The menus are displayed on touchscreens, which means that you push
the button on the actual screen display,
Note! This section contains descriptions only— not procedures. For specific procedures, see the “Initial Setup”
and “Operation” sections.
Primary Menus
The VC3700 contains the following primary menu screens (Figure 17):
•
Main screen —The main screen is the screen that displays when power is supplied to the control.
•
Level-1 menu screen —The level-1 menu screen provides access to the job store screen, the job title
screen, the job index screen, the product length screen, and the clear current data screen.
•
Level-2 menu screen —The level-2 menu screen provides access to the scan mode screen, the glue mode
screen (two-channel model only), and the repeat function.
•
Level-3 menu screen —The level-3 menu screen provides access to the clear data screen (current job or
all), the minimum speed screen, and the cell-to-gun screen.
•
Level-4 menu screen —The level-4 menu screen provides access to the product length screen, the ratio
compensation screen, and the channel compensation screens.
•
Level-5 menu screen —The level-5 menu screen provides access to the inch/metric screen, the glue QC
screen, and the PIN code screen.
•
Level-6 menu screen —The level-6 menu screen provides access to language selection.
These menu screens and their functions are described in the following paragraphs.