Valco Cincinnati VC3500, User Manual

Page: 167 / 241

Valco Cincinnati 85
Appendix A
Using the Repeat Function
The repeat function allows a glue pattern to be repeated up to 99x (99 times). This can be used to implement a stitch
pattern to reduce quantity of glue consumption. A repeat value of 00x disables the repeat function for that channel.
When the repeat function is enabled using a value from 01 to 99, the channel’s second delay and pattern are
repeated that number of times. A value of 01x will repeat the second delay and pattern one time (it will be per-
formed two times).
Example:
To repeat a glue sequence of 0.5” delay (gap) and 0.5” pattern (glue) for 20 inches on channel 1, follow these steps:
1. At the level-2 menu, press the “GLUE MODE” button. The glue mode screen displays (Figure 27).
2. Set the glue mode for channel 1 to DEL PAT DEL PAT (press the CHAN 1 button to toggle between the
two selections).
3. Press “EXIT” to return to main screen.
Figure 27. The Glue Mode Screen
Figure 28. Glue-Pattern Edit Screen
4. At the main screen, touch one of the four-digit numbers on the top half of the screen. The glue-pattern edit
screen displays (Figure 28).
5. Using the plus and minus keys, set the first delay (left parameter) to 00.50.
6. Using the plus and minus keys, set the first pattern (right parameter) to 00.50. (the first inch of the
total 20 inches has now been programmed).
7. Press the symbol in the middle of the screen to return to the main screen.
EXIT
CHAN 2 DEL PAT
CHAN 1 DEL PAT DEL PAT
0000
0000