Valco Cincinnati VC3500, User Manual

Page: 30 / 241

Menus
VC3500 User’s Manual
Valco Cincinnati 28
5 Inch or mm indicator
This field displays the measurement setup for the control. The inch symbol (") indicates imperial measure-
ments and “mm” indicates metric measurements.
6 Glue pattern length (channel 1)
This field displays the length of the glue pattern.
7 Configuration
The level-1 menu screen displays when this button is pressed.
8 Glue pattern delay (channel 2)
This field displays the distance from the leading edge of the product to the beginning of the glue pattern.
9 Channel 2 glue pattern edit
This field displays the channel assignment for the delay and pattern length settings seen on the left and
right of this display
10 Glue pattern length (channel 2)
This field displays the distance of the glue pattern.
Note! Items 11-15 pertain to the “delay pattern delay pattern” glue mode.
11 First glue pattern delay
This field displays the distance from leading edge of product to beginning of first glue pattern.
Note! A minimum of 00.01 inches (0001 mm) must be entered for the delay setting to activate the channel.
12 First glue pattern length
This field displays the distance of the glue pattern.
13 Second glue pattern delay
This field displays the distance from end of first glue pattern to beginning of second glue pattern.
14 Second glue pattern length
This field displays the distance of the second glue pattern.
15 Page down
Pressing this button displays pattern information for the next channel.
Glue-Pattern Edit Screen
The glue-pattern edit screen (Figure 18) displays when any of the numbers on the main screen are pressed. The
function of each button is as follows:
“ + ”—This button increases values for the pattern delay and length.
“ - ”—This button decreasse values for the pattern delay and length.
Symbol in center of the screen —This button returns you to the main screen.
Note! The main screen will appear automatically if the parameters in the glue pattern edit screen have not been
changed for ten seconds.