Valco Cincinnati VC3500, User Manual

Page: 140 / 241

VC3700 User’s Manual
Operation
Valco Cincinnati 53
Repeating Glue Patterns
For information on how to repeat glue patterns, see Appendix A.
Clearing Data
Both the level-1 menu screen and the level-3 menu screen have “CLEAR DATA” buttons. However, the “CLEAR
DATA” button in the level-3 menu screen has the capability of erasing all data, and the “CLEAR DATA’’ button in
the level-1 menu screen is capable of clearing data only for the current job.
To clear data, follow these steps:
1. In the level-3 menu screen, press the “CLEAR DATA” button. (The clear-data warning screen displays.)
2. Press one of the three buttons described in 2a., 2b., and 2c.:
2a. Pressing the “YES” button erases the current job’s delay and glue patterns and returns the product-
length setting to zero.
Note! Once you press the “YES” button, the data is erased and cannot be retrieved.
2b. Pressing the “NO” button returns you to either the level-1 or the level-3 menu screen without erasing
any data.
2c. Pressing the “ALL” button resets the following parameters (level-3 menu screen only):
• Delay and pattern lengths in jobs 1-99 will be erased.
• Product length = 0
• Scan mode (2-channel model only) = SCAN 1 or 2
• Glue mode = DEL PAT
• Minimum speed = 0
• Cell-to-gun = 0
• Ratio compensation = 100
• Compensation channels 1-4 = 0
• In/metric = metric
• Pin code access = deactivated
• Language = English
Note! Once you press the “ALL” button, the data is erased and cannot be retrieved.
Specifying the Scanner Mode
Two scanner modes are available for the control:
•
SCAN 1 or 2 —Scanner 1 is used to scan product for channel 1.
Scanner 2 is used to scan product for channel 2.
•
SCAN 1 1-2 —Scanner 1 is used to scan
product for both channel 1 and channel 2.