Valco Cincinnati VC3500, User Manual

Page: 45 / 241

Initial Setup VC3500 User’s Manual
Valco Cincinnati 44
Unknown Compensation Value
When the compensation value is not known, follow these steps:
1. At the level-4 menu screen, set the channel’s on and off compensation to 0 (see the “Initial Setup” section).
2. Adjust the cell-to-gun dimension for the channel until the leading edge of the pattern is correct at low
speed—that is, less than 75 feet (25m) per minute.
3. Increase machine speed to maximum.
4. Adjust the “ON” compensation until the leading edge of the pattern is correct. (Increasing the ON compen-
sation will move the leading edge of the pattern forward at high speeds.)
5. Adjust the “OFF” compensation until the trailing edge of the pattern is correct. (Increasing the “OFF”
compensation will move the trailing edge of the pattern forward at high speeds.)
Note! Do not leave “0” on the “Off” compensation setting while having a number higher than “0” on the
“On” compensation setting. This will cause the training edge of the pattern to increase in length.
Restrict Screen Access
To restrict access to screens 3–6, follow these steps:
1. In the level-5 menu screen, press the “PIN” button. The PIN-code screen displays.
2. Press the “NEW PIN” button. (A six-digit numeric keypad and a display window appear.)
Note! If a PIN code has been previously entered, the new PIN code will overwrite the old PIN code—only
one PIN code is possible.
3. Enter a four - digit PIN code.
Note! Screens 3–6 are now restricted. From now on, the six-digit numeric keypad will display when the
“MORE” button is pressed in the level-2 menu screen. To proceed to additional menu levels (3-6), a
user must enter the four-digit PIN code.
To provide non-restricted screen access, follow this step:
1. Press the “NEW PIN” button twice in order to delete the PIN code.
Return to the Main Screen
To return to the main menu screen, follow this step:
1. Press the “EXIT” button in the level-4, level-3, level-2, and level-1 menu screens.