Valco Cincinnati VC3500, User Manual

Page: 125 / 241

Menus VC3700 User’s Manual
Valco Cincinnati
36
Level-2 Menu Screen
The level-2 menu screen (Figure 21) displays when the “MORE” button on the level-1 menu screen is pressed. The
small box with the numeral 2 indicates that this is the level-2 menu screen. The function of each button is as
follows:
EXIT —Pressing this button returns you to the level-1 menu screen.
MORE —Pressing this button advances you to the level-3 menu screen. (If screens 3-6 have been restricted,
pressing this button displays a 6-digit numeric keypad, where you enter the PIN code.)
SCAN MODE —Pressing this button displays the scanner mode screen.
GLUE MODE —Pressing this button displays the glue mode screen, where you select a glue mode.
REPEAT —Pressing this button displays the repeat function screen.
The Scan-Mode Screen
The scan-mode screen (Figure 21) is used to select a scanner mode. The function of each button is:
EXIT —Pressing this button returns you to the level-2 menu screen.
SCAN 1 or 2 —Pressing this button selects use of independent scanners for channels 1 and 2.
SCAN 1 1-2 —Pressing this button selects use of a common scanner (scanner 1) for channels 1 and 2.
The Glue-Mode Screen
The glue-mode screen (Figure 21) is used to select a glue mode. The function of each button is:
EXIT —Pressing this button returns you to the level-2 menu screen.
CHAN 1 DEL PAT —Pressing this button selects either a single delay pattern (DEL PAT) or a dual delay pattern
(DEL PAT DEL PAT) for channel 1.
CHAN 2 DEL PAT —Pressing this button selects either a single delay pattern (DEL PAT) or a dual delay pattern
(DEL PAT DEL PAT) for channel 2.
The Repeat-Channel Select Screen
The repeat-channel select screen (Figure 21) is used to select the repeat-setup screen for channel 1 and/or channel 2.
The function of each button is as follows:
EXIT —Pressing this button returns you to the level-2 menu screen.
CHANNEL 1 —Pressing this button displays the repeat-setup screen for channel 1.
CHANNEL 2 —Pressing this button displays the repeat-setup screen for channel 2.
The Repeat-Setup Screen
The repeat-setup screen (Figure 21) is used to program the repeat function. The function of each button is as
follows:
EXIT —Pressing this button returns you to the level-2 menu screen.
Numeric Keypad— The numeric keypad is used to specify the number of repetitions.
ENTER —Pressing this button enters the number of repetitions.