Valco Cincinnati VC3500, User Manual

Page: 27 / 241

Valco Cincinnati 25
Menus
Introduction
This section contains descriptions of the control’s menus, which are displayed on screens. The control’s screens are
touchscreens, which means that you push the buttons on the actual screen display.
For specific operating proce-
dures, see the “Operation” section.
Primary Menus
The VC3500 contains the following primary menu screens (Figure 14):
•
Main screen —The main screen is the screen that displays when power is supplied to the control.
•
Level-1 menu screen —The level-1 menu screen provides access to the job store screen, the job title
screen, the job index screen, the product length screen, and the clear current data screen.
•
Level-2 menu screen —The level-2 menu screen provides access to the scan mode screen, the glue mode
screen (two-channel model only), and the repeat function.
•
Level-3 menu screen —The level-3 menu screen provides access to the clear data screen, the minimum
speed screen, and the cell-to-gun screen.
•
Level-4 menu screen —The level-4 menu screen provides access to the product length screen, the ratio
compensation screen, and the channel compensation screens.
•
Level-5 menu screen —The level-5 menu screen provides access to the glue QC screen (two-channel
model only), the inch/metric screen, and the PIN code screen.
•
Level-6 menu screen —The level-6 menu screen provides access to language selection.
These menu screens and their functions are described in the following paragraphs.