Vaderstad Rapid RDA 400S, Original Instructions Manual

Page: 69 / 138

RDA 400S
27.06.2011
ver.2
69
3.31.3 Drilling depth setting using the Interactive Depth Control function
To engage the Interactive Depth Control function, depress the button.
When this function is engaged, the indicator lamp in the button blinks, the alarm indicator
blinks and a buzzer sounds.
The position of the lifting ram can now be fine adjusted using the hydraulic levers on the tractor.
The ram operates at a reduced speed selected in the calibration menu. See ”
3.31.2 Calibration
menu” on page 68 .
The drilling depth scale value is displayed next to the symbol. See “Figure 3.73”. The scale
value is not an exact depth in centimetres but rather serves as a reference.
The function is kept engaged automatically for the time duration selected in the calibration menu
(3 - 60 seconds) or until the button is depressed once again.
When the Interactive Depth Control function is not engaged, the symbol is displayed to-
gether with the current scale value. See “Figure 3.74”. If the current value should exceed the set
value, the Control Station displays the warning message: “Seed depth”.
To gain access to the setting and calibration menu without having to restart the Control Station,
keep the button depressed while simultaneously depressing .
Figure 3.73 Figure 3.74