Vacon apfiff09 marine, Applications Manual, Page: 157 / 310

156
• VACON®
apfiff09 marine
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
P2.5.1.17 Output frequency limit 2 supervision ID448
“FreqOut SupvLim2”
The output frequency goes outside the set supervision limits 2 defined in Supervision Lim
parameter group. The function can be set to monitor either the high or the low limit. Limit
and functions are selected in G2.5.8 Supervision Limits.
P2.5.1.18 Reference limit supervision ID449
“Ref Lim Superv.”
Active reference goes beyond the set supervision low limit/high limit defined in
Supervision Lim parameter group. The function can be set to monitor either the high or
the low limit Limit. The functions are selected in G2.5.8 Supervision Limits.
P2.5.1.19 Temperature limit supervision ID450
“Temp Lim Superv.”
The drive temperature goes beyond the set supervision limits defined in Supervision Lim
parameter group. The function can be set to monitor either the high or the low limit. Limit
and functions are selected in G2.5.8 Supervision Limits.
P2.5.1.20 Torque limit supervision ID451
“Torq Lim Superv.
The motor torque goes beyond the set supervision limits defined in Supervision Lim
parameter group. The function can be set to monitor either the high or the low limit. Limit
and functions are selected in G2.5.8 Supervision Limits.
P2.5.1.21 Motor thermal protection ID452
“MotTherm Flt/Wrn”
Motor thermistor initiates an overtemperature signal which can be led to a digital output.
The response is selected with P2.12.5.6 ThermistorF.Resp.
P2.5.1.22 Analogue input supervision limit ID453
“Ain Supv Lim”
The selected analogue input signal goes beyond the set supervision limits defined in
G2.5.8 Supervision Lim parameter group. The function can be set to monitor either the
high or the low limit.
P2.5.1.23 Limit Control active ID454
“Limit Control ON”
One or more of the drive limit controllers is active.