Vacon apfiff09 marine, Applications Manual

Page: 113 / 310

112
• VACON®
apfiff09 marine
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
P2.2.2 Keypad frequency reference selection
ID121
“Keypad Ref Sel”
Defines which frequency reference source is used when control place is keypad P3.1
Control Place
0=”AI1”
- Analogue Input 1.
Signal scaling in “G
2.4.3: Input Signals \
Analogue Input 1”
1=”AI2”
- Analogue Input 2.
Signal scaling in “G
2.4.4: Input Signals \
Analogue Input 2”
2=”AI1+AI2”
- Analogue Input 1 + Analogue Input 2.
With alternative reference scaling in Analogue Input group 100% input values can be
set to correspond 25 Hz. That is, when both are at 100% final reference will be 50 Hz.
3=”AI1
-
AI2”
Analogue Input 1 - Analogue Input 2.
4=”AI2
-A
I1”
Analogue Input 2 - Analogue Input 1.
5=”AI1xAI2”
Analogue Input 1 x Analogue Input 2
6=”AI1 Joystick”
Analogue input 1, -10 Vdc... +10 Vdc
7=”AI2 Joystick”
Analogue input 2, -10 Vdc... +10 Vdc
8=”Keypad Ref”
Reference from keypad R3.2
9=”Fieldbus”
Reference is taken from Fieldbus, alternative scaling can select in “G: Fieldbus”
P2.2.3 Fieldbus frequency reference selection
ID122
“Fielbus Ctr Ref”
Defines which frequency reference source is selected when control place is Fieldbus
P3.1. Control Place
0=”AI1”
- Analogue Input 1.
Signal scaling in “G
2.4.3: Input Signals \
Analogue Input 1”
1=”AI2”
- Analogue Input 2.
Signal scaling in “G
2.4.4: Input Signals \
Analogue Input 2”
2=”AI1+AI2”
- Analogue Input 1 + Analogue Input 2.
With alternative reference scaling in Analogue Input group 100% input values can be
set to correspond 25 Hz thus when both are at 100% final reference will be 50 Hz.
3=”AI1
-
AI2”
Analogue Input 1 - Analogue Input 2.
4=”AI2
-
AI1”
Analogue Input 2 - Analogue Input 1.
5=”AI1xAI2”
Analogue Input 1 x Analogue Input 2
6=”AI1 Joystick”
Analogue input 1, -10 Vdc... +10 Vdc
7=”AI2 Joystick”
Analogue input 2, -10 Vdc... +10 Vdc
8=”Keypad Ref”
Reference from keypad R3.2
9=”Fieldbus”
Reference is
taken from Fieldbus, alternative scaling can select in “G: Fieldbus”