246
4.11.2.2 Port
The connection interface is shown as in Figure 4-34.
Figure 4-34
Please refer to the following sheet for detailed information.
Parameter
Function
Max connection The max client login amount (such as WEB, platform, cellphone
and etc). The value ranges from 1 to 128(default).
TCP port
The default value is 37777. You can input the actual port
number if necessary.
UDP port
The default value is 37778. You can input the actual port
number if necessary.
HTTP port
The default value is 80. You can input the actual port number if
necessary.
HTTPS
Select the Enable check box and configure the port according to
your actual needs. The default value is 443. After HTTPS is
enabled, HTTP will be switched to HTTPS by force to transmit
data in a safer way.
RTSP port
The default value is 554.
4.11.2.3 Wi-Fi AP
This function is available only for NVR devices with built-in Wi-Fi module. See the actual situation.
4.11.2.3.1 General Setup
The Wi-Fi AP interface is shown as in Figure 4-35. Select the Enable check box and you can set Wi-Fi
hotspot including SSID, encryption type, password, channel and gain, so that the Wi-Fi IPC can use the
hotspot to connect to the network.
Summary of Contents for EmPower NVR
